Proteor Print

Extrusion Line #1

Spool certificate

GJPM

PLA

Natural

Manufactured 2026-11-03 · 08:01 – 08:26

735 readings

98.8%of average readings within 2.850 ± 0.150 mm

Average across the spool

upper limit 3.000lower limit 2.700high 3.077low 2.821

Out of tolerance, outside 2.700 to 3.000 mm

Min
2.821mm
Max
3.077mm
Range
0.256mm

Units: mm

Approved by RileyBeenders

Start of spool, trimmed

This spool went out of tolerance and was marked Inspect before it was approved.